Frontier paper feeding is a relatively advanced paper-feeding machine technology that replaces rear-kick paper feeders and chain feeders. 

Under the action of periodic acceleration, synchronization and deceleration, the stacked cardboard is accurately sent to the printing unit. 

Its main advantage is that it can greatly reduce the pressure of the paper pulley on the cardboard, thus protecting the original compression resistance 

of the cardboard. Strength, the same gram of base paper has better strength

Industry Status:

How to make several groups of paper feeding shafts and rubber wheels coordinate with the paper feeding according to a certain timing according 

to the real-time position of the printing plate roller, so that the paper feeding accuracy required by customers can be achieved after the paper is sent out, 

which is the core requirement of frontier paper feeding equipment.

The solution launched by Sine Electric:

All-in-one machine solution: EA180 frontier paper feeding non-standard servo realizes internal control through information interaction between servos, saving operation and control costs.

Controller scheme: motion controller + EA350 high-performance servo + ultra-low inertia motor, which makes the maximum paper feeding speed supported 

by the pulling material faster, the paper feeding accuracy is higher, and the debugging is more convenient

The frontier feeder feeds back the position to the servo/motion controller through a shaft-mounted encoder proportional to the printing plate roll axis

Under the action of periodic acceleration, synchronization and deceleration, the paper feeding rubber wheel can accurately send the stacked cardboard into the printing unit.

All-in-one solution:

It consists of a touch screen, a servo drive, and two parts:

1 Touch screen: responsible for the data display and control of the system;

2. Servo driver: Execute internal instructions and control the operation of motors at key stations;

Motion controller solution:

It consists of touch screen, motion controller, servo driver, and three parts:

1 Touch screen: responsible for the data display and control of the system;

2 Motion controller: logic control of the whole equipment;

3 Servo drive: Execute the motion controller instructions to control the operation of the motor at the key station;

All-in-one machine solution: 180 frontier paper feeding non-standard servo + touch screen, reducing operation and control costs, 

the function is consistent with the paper feeding effect and function of popular models on the market, and has high cost performance.

Motion controller solution: 350 high-performance series servo driver + ultra-low inertia motor + motion controller, 

fast paper feeding speed, high paper feeding accuracy, simple debugging and convenient maintenance.